How to Apply Vinyl

Step 1:
Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the decal from adhering well.

Step 2:
Prepare the decal for application by firmly rubbing a credit card across the transfer tape (transfer tape is the tape placed on the front of decal). This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.

Step 3:
Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.

Step 4:
Slowly lower the decal onto the surface and rub it in place firmly with a credit card. For best results, wait 24 hours before moving to the next step.

Step 5:
Slowly peel the clear transfer tape off at an angle. Be careful not to pull the decal off the surface. If sticker pulls away from the surface repeat Step 4.